Sep 112014
 
Lately I’m working on a collaborative book project; three authors, one editor, and a small collection of raw content contributors.  It’s an exciting prospect but have to say, when it comes to co-managing a project like this sometimes little things become surprisingly big.  Like platform preferences.  Everyone has their pet tool and trying to get consensus on one easily reduces to finding the Least Worst Overall Not-Quite-Hated solution.  We’re working through that, but…

In our first conversation, Charlene the editor she asked me something about iPhones and the conversation went

Me: I wouldn’t know; I use a Windows Phone
Charlene: Oh, I’m sorry

So many ways to go with that… but suffice to say that from my perspective it proves how much more convincing a distortion field can be than reality.  I’m in no way impugning Charlene– she’s definitely sharp or I wouldn’t have started following her in the first place.  But Apple and others have done a spectacular job at misinforming even the discerning public.

Microsoft is included in that others category. Continue reading »

Jan 102014
 

I’ve been working with various developer communities for several years, and there’s a common question I encounter regardless of the platform:

Q: “What should I work on?”

This isn’t always easy to answer specifically, because a great deal depends on the skills and interests of the person asking.  But there is an easy general response:

A: “Solve a problem for yourself.”

I’ve found that the developers not asking that question tend to do exactly that.  They have a need, see no available solution, and jump right into solving it for themselves.  Often enough, that tends to work for others as well. Continue reading »

Dec 062013
 

Greetings all!  It’s time to dive back into Windows Phone developer community land.  In this post I’ll be sharing the good and not-so-good news for WP development in my region, which is physically centered in the Dallas-Fort Worth area but also includes Oklahoma, Kansas, Colorado, Nebraska and South Dakota.  I’ll summarize the year and share some ongoing/upcoming stuff too. Continue reading »

Oct 012013
 

Deliver HereI’ve just recently gotten serious about learning XAML for Windows Phone development, and it’s been a real rollercoaster.  Hours of bad-document-reading, tutorial-deciphering and hair-pulling punctuated by brief bursts of accidental success.  My wife has learned to ignore my cursing but my poor dog Peanut still runs under a corner desk when some seemingly innocent code breaks.

Part of the problem for myself (and others, based on threads on MSDN and stackoverflow) is that documentation is woefully incomplete.  Too many examples telling you WHAT needs to be done but annoyingly omitting critical HOWs.  Too many segments of potentially useful code lacking the necessary prerequisite references to run.

But I digress.  And if you just want to avoid further background and skip to the solution, scroll down.

I’m working on a C# Windows Phone geolocation app designed to route an email recipient to a person in need.  One of my goals as always is to craft the best user interface for the solution.  For touch devices, that often means stripping out conventional interface objects like buttons because they tend to occupy a layer between the user and what he or she wants to do.  In this case, I want the app’s Map object to be the center of attention, and most if not all user interaction to take place on or around it.  As is my norm, I dose this work with lots of context sensitivity.

I began with PNG objects like those shown in this post.  I got that working fine eventually; tap on the graphic, and a context menu of several options pops up.  Select one, and the graphic updates to reflect the user’s purpose.

But as I began the task of replacing Application Bar buttons with more Map-centric interaction objects, I began thinking that bitmap graphics were too low fidelity.  If I went with vectors, and added more Map layers, I could truly orient the user better and improve engagement.  The Map itself could host most of the UI.I Need HELP

It’s easy enough to add polygonal objects to XAML.  Many of the Windows Phone content objects can host them.  But once you get beyond simple shapes, editing can be a pain.  One quickly misses Adobe Illustrator.

I found a really sweet XAML export plugin for Illustrator, but the creator has been unable to update it past CS4.  I’m using Creative Cloud, and older plugins no longer function [edit: as one reader pointed out in comments, Microsoft's Blend can import AI files.  Part of my purpose here was to identify a completely free solution.  For many uses, Inkscape works fine].  I discovered that the free vector editor Inkscape supports XAML export, so it was a no-brainer to bring my AI graphics into it and export.  Below is an SVG file of my Map Pushpin object:

`<?xml version=”1.0″ encoding=”utf-8″?>
<!– Generator: Adobe Illustrator 17.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  –>
<!DOCTYPE svg PUBLIC “-//W3C//DTD SVG 1.1//EN” “http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd“>
<svg version=”1.1″ id=”Layer_1″ xmlns=”http://www.w3.org/2000/svg” xmlns:xlink=”http://www.w3.org/1999/xlink” x=”0px” y=”0px”
width=”28.263px” height=”72.538px” viewBox=”0 0 28.263 72.538″ enable-background=”new 0 0 28.263 72.538″ xml:space=”preserve”>
<circle fill=”#3D5EAB” fill-opacity=”0.9″ cx=”14.132″ cy=”7.041″ r=”7.041″/>
<path fill=”#3D5EAB” fill-opacity=”0.9″ d=”M14.132,16.012C6.327,16.012,0,22.339,0,30.143v0v42.395l28.263-28.263V30.143
C28.263,22.339,21.936,16.012,14.132,16.012z M22.332,44.275h-3.956v-8.347H9.814v8.347H5.872V23.784h3.942v8.076h8.562v-8.076
h3.956V44.275z”/></svg>`

I next exported that to XAML, getting:

`<?xml version=”1.0″ encoding=”UTF-8″?>
<Viewbox xmlns=”http://schemas.microsoft.com/winfx/2006/xaml/presentation” Stretch=”Uniform”><Canvas Name=”Layer_1″ Width=”28.263″ Height=”72.538″ Canvas.Left=”0″ Canvas.Top=”0″><Canvas.RenderTransform><TranslateTransform X=”0″ Y=”0″/></Canvas.RenderTransform><Canvas.Resources/><!–Unknown tag: metadata–><!–Unknown tag: sodipodi:namedview–><Ellipse xmlns:x=”http://schemas.microsoft.com/winfx/2006/xaml” Canvas.Left=”7.1″ Canvas.Top=”0″ Width=”14.1″ Height=”14.1″ Name=”circle3405″ Fill=”#E63D5EAB”/><Path xmlns:x=”http://schemas.microsoft.com/winfx/2006/xaml” Name=”path3407″ Fill=”#E63D5EAB”><Path.Data><PathGeometry Figures=”M14.132 16.012C6.327 16.012 0 22.339 0 30.143v0v42.395l28.263-28.263V30.143  C28.263 22.339 21.936 16.012 14.132 16.012z M22.332 44.275h-3.956v-8.347H9.814v8.347H5.872V23.784h3.942v8.076h8.562v-8.076  h3.956V44.275z” FillRule=”NonZero”/></Path.Data></Path></Canvas></Viewbox>`

I am LOSTOther than redundant schema info and unknown tags, it looked okay.  I cut out the portion I needed (Canvas tag content) and plopped it into a XAML MapOverlay in my project.  Visual Studio immediately complained:

TypeConverter for “PathFigureCollection” does not support converting from a string

The offending bit was the Figures object.  Time to Bing for an explanation… but while I found many examples of people encountering the error, there were no useful solutions.  Some mentioned Kaxaml, which I downloaded.  While it’s a very helpful tool for visualizing and troubleshooting XAML, it didn’t see any problems with my code and offered no way that I could see to refactor what I had into something Visual Studio would like.

The Solution

But reading more about the PathGeometry object tickled a few brain cells.  I found a Path example that looked like it would work for what I wanted.  So I changed the essential code to what follows (key portion in bold):

`<Canvas Name=”Layer_1″ Width=”28.263″ Height=”72.538″><Canvas.RenderTransform><TranslateTransform X=”210″ Y=”300″/></Canvas.RenderTransform><Ellipse Canvas.Left=”7.1″ Canvas.Top=”0″ Width=”14.1″ Height=”14.1″ Name=”circle3405″ Fill=”{StaticResource PhoneAccentBrush}” Opacity=”0.8″/><Path Name=”path3407″ Fill=”{StaticResource PhoneAccentBrush}” Data=”M14.132 16.012C6.327 16.012 0 22.339 0 30.143v0v42.395l28.263-28.263V30.143 C28.263 22.339 21.936 16.012 14.132 16.012z M22.332 44.275h-3.956v-8.347H9.814v8.347H5.872V23.784h3.942v8.076h8.562v-8.076 h3.956V44.275z” Opacity=”0.8″ /></Canvas>`I Want to Play

Success!  In a nutshell, the trick was to remove the PathGeometry and use the Figures string as Path Data…. which just makes sense.  My custom Pushpin rendered exactly as it should, and looked much sharper than the PNG bitmap.  Now to construct other UI elements, add Map layers, and wire up the events.  I’ll post more later, and will provide the full code on app release.

Hope you find this technique useful!

 

Aug 232013
 

I’m behind on publishing some content but an opportunity has come up that trumps just about everything else.  Except beer and pizza.  First the background.

Many of you know that for several years now I’ve been supporting creative communities, both on and offline.  If I really want to date myself then this activity goes back further than I’ll usually admit, to a stint as a writing forum moderator in the heyday of America Online.  Don’t judge: it meant free dial-up.  ;)

As you can see on LinkedIn, my more recent history has gone from Maemo to MeeGo to Windows Phone plus local Makers.  An interesting mix of communities that has helped me understand myriad arguments for and against various platforms and preferences, as well as learn to socialize with creative types from all walks of life.  This understanding has pushed my thinking above and away from the sort of religious dogma that can cripple a project, and in turn helped me (I think) be a really good all-around community leader.  And even as I’ve helped Nokia’s efforts to pull in Windows Phone developers, I’ve kept a watchful eye on Jolla and kept fairly current with Qt developments.  I even assisted Tuukka Ahoniemi with Qt outreach in Dallas (although other activities got in the way, something I would fix if I got this role).

Which leads me back to the opportunity.

Against all odds, I will be interviewing with Digia soon for an Online Community Manager position.  Exciting!  I think I’m the ideal candidate, and so do a few others who have already spoken on my behalf.  But landing this position will take some serious effort: they really want someone situated in Norway, Finland or Berlin.  I have to prove that I can do even better than someone in close proximity.

Now, I’ve done the remote working thing both voluntarily for the aforementioned communities and professionally for Nokia.  I know I can perform this role with the same success.   Heck, I’ve always said I can work from Antarctica as long as I had Internet.  I just need to convince Digia.

To that end, I’m looking to the communities I serve for advice.  What should I emphasize?  In what areas do I still require polish?  Feel free to add comments here.  Be critical if you feel led.  Or contact me privately, too.

I had a similar opportunity with Scarlet Motors at one point, and touched on that in an article about keeping a childlike aspect in communities, but unfortunately they lacked the means at the time to make it a paid position.  The Digia role will be full time, and involves work I love and have been preparing for.  I relish the opportunity to take lessons learned from other communities and see where it will support Qt’s desire for broader adoption.

I really, really want this job.  Your feedback will help, and perhaps so will lobbying Digia.  Make sure to hit Qt Project and Qt by Digia on twitter, as well as their Facebook page.  After all, a good online community manager should mobilize Internet citizens, right?  ;)

Thanks.

Aug 042013
 

In the last community update I included one upcoming hackathon and omitted some promotions.  Time to rectify the latter and expand on the former!

General Promotions

Unity has a new contest going for Windows platforms.  Big prizes involved!  From their website:

Unity and Microsoft are inviting Unity developers to enter a new contest by submitting beautifully crafted, high-quality new or existing games or content for the upcoming Windows Store Apps and Windows Phone 8 platforms. Over $100,000 in cash and prizes will be awarded to a number of talented and lucky winners.

Deadline is September 30, 2013.  Get your game on now!

In arandallarnoldddition, Microsoft has created a program slightly similar in goals to Nokia’s DVLUP, called App Builder Rewards.  Might as well double-dip!

Finally, I missed that Microsoft Tech Affiliate had restarted the great APPortunity sweepstakes.  Submit your apps for August ASAP.

Remote/Virtual Hackathons/Events

Nothing to report yet– let me know if you discover any!  In addition to online events, those in any region I cover will be promoted here.

DFW Hackathons/Events

Here’s more info on what’s coming (I will not attend all events and/or all times; more on that as details firm up):

August 2013 NDDNUG Meeting
August 8 6:00 PM to 8:30 PM 2013
5543 Legacy Drive, Plano, TX (MedAssets bldg)
link: http://northdallas.net/location/

August 2013 FWDNUG Meeting
August 20 6:00 PM to 8:00 PM 2013
100 Pier 1 Pl, Fort Worth, TX (Pier 1 Home Office)
link: http://fwdnug2013aug-es2.eventbrite.com/?rank=1

UTD-Microsoft Windows 8 app dev workshop
August 20 9 AM to August 23 5 PM 2013
800 West Campbell Road, Richardson, Texas (University of Texas at Dallas, ECSS 2.412)
link: https://ezpay.utdallas.edu/C20239_ustores/web/product_detail.jsp?PRODUCTID=1055

UNT Startup Primer
September 6 6:00 PM to September 8 6:00 PM, 2013
Sycamore Hall 119, University of North Texas
307 Ave. B, Denton, TX 76201
link: http://untuniontickets.universitytickets.com/user_pages/event.asp?id=187&utm_source=Co-Founder&utm_campaign=CoFoundersLab+08082013

UNT Music Hackathon
September 13 6:30 PM to September 15 8:30 PM 2013
1155 Union Circle #305189 Denton, TX (Innovation Greenhouse)
link: http://innovation.unt.edu/events/september-2013/music-hackathon

20 over 20 Hackathon
September 19 12:00 PM to September 22 4:00 PM 2013 (team announcement September 18)
315 S. Cesar Chavez Blvd, 2nd Floor, Dallas, TX 75201 (Dialexa)
link: http://the20over20.com/

AIGA DFW Hackathon with Open Dallas
September 21 8:00 AM to 7:00 PM 2013
2919 Commerce St, Dallas , TX,
link: http://thecommondesk.com/event/aiga-dfw-hackathon-with-open-dallas/

HackerNest DFW September Tech Social
September 30 8:00 PM 2013
(No location yet)
link: http://www.meetup.com/HackerNestDFW/events/123491032/

LeadingAge Hackfest
October 25 7 PM (optional meetup) to October 27 5 PM 2013
650 Griffin Street, Dallas, TX (Convention Center)
link: http://leadingagehackfest.org/
link: http://www.meetup.com/LeadingAge-HackFest-in-Dallas-Group/events/132040302/

HackerNest DFW November Tech Social
November 25 8:00 PM 2013
(No location yet)
link: http://www.meetup.com/HackerNestDFW/events/123496772/

Others with no firm dates (more details to follow):

Nokia DVLUP Day DFW
August?  September?  2013

UNT Aged Well Hackathon
September 2013

Mobile Monday DFW – Windows Phone App Showcase
October? 2013

Nokiathon DFW
October?  November? 2013

UNT Energy Hackathon
November 2013

Hope to see some of you at one or more of these events!  Again, send me any I may have missed.

Jul 272013
 

In 2012 I “attended” Microsoft’s //build/ developer-focused event virtually, envious of friends with the good fortune to attend.  Thanks to my Nokia Developer Ambassador gig, this summer I got to enjoy the excitement first hand.  Instead of a lot of text, though, I’ll share some highlights with the focus on photos (all taken with a Nokia Lumia 920):

sim key

Here’s a little gift I had made up for fellow Ambassadors: a 3D printed, DVLUP-branded SIM key for unibody Nokia Lumia phones.  It replaces the stock key that can stab delicate areas.  Thanks to Shapeways for printing them up, and Rich Dunbar for approving the expense!

George

SoCal Ambassador George Salcedo waits for the rest of the gang on Day 1.

ant

Nokia Developer Champion lead Antoine Naaman shoots the cool Wall of Windows Phones.

Jambassadors

The Nokia “Jambassadors” team discussing their //build/ hackathon project.  From left to right: Paras Wadehra, Jan Hanneman, Lance McCarthy.

lance and jan

Boston area Ambassador Lance shares his thoughts with team member Jan (northwest region).

designing

I helped a little by designing a custom part for the project…

pad design

…and here’s the design in progress on SolidWorks.  Amazing that it runs on a Surface Pro!

Jan and 3D printer

I decided to print up two of the parts.  Here Jan enjoys watching one get underway on an UP Plus.

3D printer

Closer shot of the part in process.

Nokia booth

Meanwhile, the Nokia booth got really busy after we put out word about DVLUP tee shirts…

finished green pad

The 3D Systems team kindly printed up another part for us with one of their Cube devices.  It was extremely helpful to have this resource at the event!  There were 3D printers everywhere, cranking away on all sorts of things.

2 pads

The two completed parts.  Each took about 2 hours to print.  I hand-colored the red apple.

app at work

The end result.  Lance had the novel idea to combine a Netduino with a pressure transducer and replicate the “test your strength” carnival games on a smaller scale.  The parts I created were pads.  Unfortunately, the pad wore down the pressure transducer, putting the entry at risk, but Radio Shack saved the day with conductor repair compound.

leaderboard2

Look who tops the iSmack leader board!

interview

Peers voted iSmack the best app of the hackathon!  Here the Jambassadors are interviewed on stage by Microsoft’s Clint Rutkas for Channel 9.

Of course, there was a lot more going on, but these photos essentially cover where I was.  ;)  Hope to make it next year!

May 282013
 

For those who have been active in the Dallas-Fort Worth Windows Phone developer scene for some time, the headline here may seem odd.  After all, the Meetup.com group has been gathering on occasion since this time last year.

But what’s been missing, according to the most common feedback I receive, are semi-social gatherings with a focus on Getting Stuff Done.  Attendees have had enough consumption; they’re ready to create.

With that in mind, I have spent the past few months scouring DFW for good venues for this activity.  I put together the following criteria for sites:

  • Should be free (or at least low-cost)
  • Should have easy facility access (preferrably no security hurdles)
  • Must have decent, dependable WiFi
  • Must have easy access to power
  • Must have comfortable seating for at least 15 attendees for 3+ hours
  • Should have easy access to food and drink (including catering)
  • Must be available weekends and/or evenings

This is not an easy bill to fill.  I encountered many potential venues that had one or more of the must-have items but lacking something critical (usually weekend/eveing access).  To increase our prospects, I asked community members to aid in the search.  Pointing out a possible location wasn’t enough– I needed these foot soldiers to compare sites against the requirement list, talk to managers, and even take pictures.

It may come as a surprise to readers that grocery stores turned out to be generally good locations.  Specifically, the Tom Thumb flagship stores, which meet every Must and Should.  The only drawbacks I’ve run into were man-made… such as the strange reluctance of one store manager (who was worried about us displacing customers, when I saw only 3 people occupying a 35-seat area) and human mistakes.  Mostly mine.

I had scheduled a meetup for May 25 at a Tom Thumb store in Arlington after one member, Dallas .NET’s Omar Villarreal, got clearance from the manager.  Unfortunately I misread Omar’s instructions and secured the wrong store.  When the group arrived, we discovered that there was no WiFi or Starbucks.

Oops.

We waited for stragglers to show before moving to another Tom Thumb a few miles north.  This cost us an hour and a half of valuable time.  Lesson learned: read the fine print.

The second store turned out to be acceptable.  WiFi was mostly reliable (I had a couple of brief drops) and the deli sandwiches were excellent (I recommend the pulled pork).  The 5 other attendees seemed fairly pleased.  However, the late start combined with another error on my part got in the way of getting any work done.

I had set aside the beginning of the meetup for introductions and announcements, which would be okay for social meetups but took way too much productive time from this one.  Socializing is certainly useful, but we’ll hold separate events for that.

I would like to think that the attendees at least benefitted one way or another, but I welcome constructive criticism to help shape future get-togethers.  I definitely need to arrive early to get things set up.

The good news is that this somewhat-rough experience was useful in certain contexts, especially since we had new members attend, and allowed me to get a good idea of what works and doesn’t work.  Going forward, I will put together a handout for updates and trim the initial verbal presentation down to about 5 to 10 minutes.  Less time of me chatting, more time Getting Stuff Done.

Ideally, we will see a good mix of skill levels and experience at these sessions.  I really want to pair mentors and experienced app publishers with beginners, for one.  Same with bringing in more data modelers and UI designers.  To motivate members in that regard, I am offering a recruting incentive: bring in any new member with any useful skills for app creation, and get a $10 gift card.  Bring in any new member with at least one published app, and that amount goes up to $20.  Stipulation: new members must agree to sign up at DVLUP and also provide me full contact information before I award the gift cards.  This promotion runs until I am broke or we have too many members.  ;)

Speaking of DVLUP, I’m also considering holding specific “DVLUP Days” events with the goal of just tackling DVLUP challenges at the event.  XP building opportunities, if you will.  I’m also working on partnering with various companies and instructors for educational meetups– stay tuned!

My intent is to “bounce around” the metroplex and hold these sessions in various parts of the area, with a preference for central locations.  If you know of any, let me know!  By all means, ask the managers about the items on my list, and pictures of the venue are very helpful.  And ask your employers about hosting!

We’ll probably hold another such event in North Dallas next, at an office near highway 35E and Beltline Road.  Registration will be at the Meetup.com website, and I will announce in the usual social channels.

Ultimately, we’ll get into a rhythm that will benefit everyone involved.  I can’t wait to see the results!

Mar 102013
 

SMU Hackathon

The last time I did a “Where I’m At” post was too long ago, so let’s get this thing going without much preamble.  And no, this isn’t about US college basketball playoffs.  Just feels like it sometimes.

Nokia Stuff

As many if not all of you know, I returned to Nokia on a part-time contract basis in late 2012.  I still have a full-time day job, and commit a large part of my other hours to sharing the Nokia Lumia story with current and hopeful developers in North Texas… with some virtual forays into neighboring states.

Here in DFW there’s been a steadily growing increase in interest, something I’ll blog in more detail about later.  But it’s still a mostly Apple world in these parts, at least from a user perspective, while the local developer community largely feeds on Android.  The Dallas-area Windows Phone developer crowd has reached a respectable size, though, to the point where this part-time gig feels more like full-time.

That last part has been mitigated through cultivation of additional community leaders.  For instance, Bary Nusz in Amarillo, Texas and Patrick Hefner of the Nashville, Tennessee area have been phenomenal in growing the Nokia developer and enthusiast base for their regions.  They’re being rewarded with Lumia phones and something maybe even more useful: Nokia Developer Champion nominations.  The Champions are volunteers recognized for some form of advanced leadership– technical, community-oriented or both.  The perks are very nice.  I have not heard yet if Bary and Patrick will have their nominations approved [update: both were], but they are both deserving in my opinion.  I’ll be spending a great deal of time this year on Champion development.  If you’re interested, contact me!

And if you haven’t checked out our DVLUP incentive program, what are you waiting for?  It’s out of private beta so no registration codes required now.  The challenges have been updated and cool new rewards added.  If you’re an existing Windows Phone developer and haven’t joined, you’re already cheating yourself out of some really cool stuff.  If you’re new to the experience, you’ll find helpful people there and at Nokia’s core developer community as well (our wiki is legendary).  So get engaged!  Some lucky DVLUP participant and Cowtown Code Camp attendee stands to win big– more on that in a following post.

The Maker Space

Being a founder and director of the new and rapidly-expanding Fort Worth Makerspace community keeps me pumping as well.  To minimize conflicts and make it easy on this old body, I’m focusing on areas where Makers can play in the Nokia product ecosystem.  This goes beyond simple app development into some really cool areas, like 3D printing.

As I shared over at post404, I helped kickstart Nokia’s involvement in crowdsourced 3D printing and have been assisting John Kneeland as he promotes this venture into even bigger proportions.  The project started with the sexy Lumia 820 and has recently been expanded to include the newer 520 model.  It remains to be seen if calls for supporting unibody devices like the 920 prove feasible.  I’ve formed a mobile technology special interest group at our local makerspace for those interested in participating.  See Nokia’s developer wiki for more details.

I’m trying to get some sort of contest developed around 3D printing of Lumia back covers, and hope to share something soon.  Meanwhile, Shapeways has announced a 3D printing API and I’m very excited about the possibilities it presents!  Check it out.

Before 3D printing took off in the consumer space, the Internet of Things was largely about mobile and embedded devices.  Sensors everywhere would feed data to the web, turning the Internet itself into a rich field of environmental I/O.  Arduino and Netduino devices are especially designed to participate in this space, and I plan to bring the latter into my Nokia outreach efforts.  Ideas welcomed!

Perceptual Computing

As if all that wasn’t enough, I’ve been asked by Intel’s awesome Bob Duffy to whip up local enthusiasm for their perceptual computing challenge.  How could I resist?

In a nutshell, Intel is promoting the development of novel interactve solutions built around Ultrabooks and Creative’s Interactive gesture camera.  Consider the latter as a laptop-scaled analog to Microsoft’s Kinect camera and you get the picture.

This article at Venture Beat provides an introduction to what Intel is trying to do:

The latest laptops, known as Ultrabooks, will have multiple ways to interact.  Nuance-based voice controls will let you talk to your computer to run Google  searches, start playing music, or share links on Twitter. Perlmutter, who is  from Israel, said the technology will eventually be able to understand even his  accent.

Intel is also working with SoftKinetic to bring 10-finger gesture recognition to the PC. With it, you can wave your fingers in front of the camera of a  computer, and it will recognize your gestures. [Intel executive vice president Dadi Perlmutter] showed how he could use his  fingers to control a catapult game demo and hold a crystal ball, by waving his  hands in front of a computer and not touching it.

I’ll be using my Maker channels to organize activity around this one, although I have also been informing the local Nokia outreach community of the opportunity.  I have developer devices available for loan and session work; I’ll have something more formal to announce soon for the next phase of the challenge, but feel free to hit me up via email if you’re at all interested in learning more.  First, however, get familiar with the program and tools.  Note that my direct support of this activity will be limited to the immediate Dallas-Fort Worth area.

Bob has an analysis of where the challenge is currently, and it’s worthwhile reading.

Getting Qt

Sadly, I have not had much time for Qt lately.  I do want to rectify that, but at the moment I don’t see how.  I’m still interested in the platform, especially where Jolla is concerned, and even in coding for my coveted N9… but overcommitment is a bad habit that I’m working hard to break.  I’ll still share Qt news, mostly on twitter, and continue trying to make time for learning it.  I’m thrilled at its prospects and assured by its recent advances.

!Spam

As noted before I have a lot of work to do with this site.  Most of it has been invisible: theme-searching, plugin-testing, etc.  The necessary grunt work that feels like time wasted.  I definitely need to add some resource pages, and that’s in the works.

One of my goals is to push content to your preferred channels so you don’t have to subscribe to MY preference(s).  So besides this site, here’s a list of outlets where you can expect updates:

Twitter

Texrat (general)
NokiaDevNorthTX (Nokia outreach specific)

Facebook

Texrat (general)
Nokia Developer Outreach North Texas page
Nokia Developer Outreach North Texas group
Mobile Monday Dallas

Google Plus

Nokia Developer Outreach North Texas community

Meetup.com

Windows Phone App Developer Group – DFW North Texas

LinkedIn

Develop with Nokia
Windows Phone Community
MobileMonday
IdeasProject
Windows App Developers
Developer Evangelists

Nokia Developer

Windows Phone App Developer Group – DFW Dallas Texas
3D Printing and Nokia Developer Outreach North Texas

Website(s)

Fort Worth Makerspace

Up Next

I’ll be attending a Board of Directors meeting for the Tarrant County Maker Community Foundation this week.  If you have anything you want me to raise there, let me know!

Here are some upcoming events:

Cowtown Code Camp 2013
Mobile Monday Usability/Accessibility Brainstorm DFW

Much more to come!

Jan 022013
 

Late last year as many of you know I rejoined Nokia in a part-time capacity, supporting developer outreach.  I neglected this blog a bit because I was focusing most of my attention on our local Windows Phone meetup site, but that’s about to change.

Going forward, I wil transition the bulk of my community support activity to this blog, as well as two twitter accounts: @NokiaDevNorthTX (was @DFW_WPDEV) and my old generic account, @texrat.  The latter is blessed with the most followers, but they’re so diverse (and include many people disinterested in Windows Phone) that I will use @NokiaDevNorthTX for highly-focused Windows Phone activity.  Still, expect at least few retweets on the @texrat side!

Last year I sponsored and otherwise supported some fun meetups and events, and 2013 will be no different.  January starts off with the North Texas Smartphone App Competition 2013, followed closely by a local instance of the 2013 Global Game Challenge.  Both events will also have preliminary meetups.  We’ll also be holding regular group meetups at Nokia’s Irving site starting in January.  The first meeting will cover many topics, and my hope afterwards is to have one major topic for each meetup.  We’ll have a really exciting one for April oriented around usability and accessibility, and I’m also putting one together (probably for March) with the theme of creating compelling apps.  I’ll be bringing in guest speakers from various companies and organizations, and looking for volunteers!

Speaking of meetups, the DFW meetup group grew fairly well in 2012, finishing the year at 107 members.  Out of that number, there were about 20 or so really active participants, some of whom have flirted with the Nokia DVLUP Leaderboard (must be registered to view; ask me about that if you aren’t) and quite a few winning prizes and awards for their work.

One thing to note: for reasons unclear to me, I have lost co-organizer status at the DFW meetup group.  This means I can no longer organize meetups or events on that site, or even update resource pages I created.  I will therefore be exploring other options… possibly Eventbrite.

I was also a little discouraged at low participation in certain community challenges, so I’m looking for feedback on how to do better this year.  Let me know any ideas you have for incentives and contests.

As for DVLUP… it’s still a Canada/USA program only for now and I know that frustrates those of you outside those countries.  Nokia of course recognizes the need to expand this opportunity so I hope you’ll be ready to jump in when it’s available to you.  It’s become quite popular and the development team has been hard at work fixing bugs and implementing new features.  Participant feedback is key!

Of course, while Windows Phone consumes the bulk of my community work these days, I’m still involved in other initiatives.  I’m on the board of directors for a local Make organization, still interested in 3D printing, and helping Digia as I can with local Qt meetups.  But I did drop some other activities due to time constraints.  I can only be stretched so thin, unfortunately.

Anyway, there’s going to be a lot going on this year and I have my work cut out for me.  Soon I hope to beef this site up a bit and make it a truly useful resource for you.

Thanks everyone for your support!

%d bloggers like this: